118
8.2 Web Browser Viewer
This section introduces the remote viewing and control through Web Browser Viewer.
This function is supported only in the IE browser. You may encounter abnormal
operations if you use other browsers.
Install the Active-X directly from the webpage (For initial installation). Refer to the
following example to enter the Web Browser Viewing:
Step 1 Start up IE Explorer and enter the DVR IP address to IE address bar.
(Please refer to DVR Network Information of DVR IP Address.)
Step 2 An alert message occurring “Install ActiveX control” on the tool bar.
(Please refer directly to step 9 if ActiveX has already been installed)
Step 3 Click on this alert message and select “Install ActiveX Control”.
Step 4 If the message “Your security Settings do not allow web sites to use ActiveX
controls installed on your computer.” pops up when logging in, please follow
following instruction.
Step 5 Select the IE browser “Tools” on the tool bar and select “Internet Options”
To Next Page
Loading...
Need help?
General
