To Next Page

To Previous Page

3.6 Detector Setup

Click “Detector Setup” on the Main Menu.

3.6.1 Channel Number

Select the icon “ ” to setup for all channels at one time.

Select any “ ”, “ ”, “ ”, “ ”, “ ”, “ ”, “ ”, “ ” to individually setup each channel.

3.6.2 Alarm Setup

Alarm Setup is accessed to configure the alarm mode of each channel, individually, or

for all channels, simultaneously.

3.6.2.1 Light Detect Mode

This mode will be triggered when the video input and when the environment light

becomes dark unexpectedly (close to complete darkness) or there is direct exposure by

DETECTOR SETUP

Channel Number

Alarm Setup

Light Detect Mode [Sensitivity OFF]

Light Detect Alarm Mode [Mute]

Blind Detect Mode [Sensitivity OFF]

Blind Detect Alarm Mode [ Buzzer-Short]

Video Loss Mode [ Disable]

Video Loss Alarm Mode [ Buzzer-Short]

Motion Setup

Sensor Setup