35
intense light. This mode is related to the ambient lighting of the DVR. The light intensity
settings will have no effect when using the IR cameras.
Choose any of the following settings to adjust the sensitivity of light detection:
Sensitivity OFF: No sensitivity
Sensitivity Low: Low sensitive level
Sensitivity Normal: Normal sensitive level
Sensitivity High: High sensitivity level
Sensitivity Highest: Highest sensitive level
3.6.2.2 Light Detect Alarm Mode
Select the alarm mode when the Light Detect Mode is triggered.
Mute: No beep whatever loss of light or not.
Buzzer-Short: Beep shortly by buzzer on main board.
Buzzer-Long: Beep long by buzzer on main board.
Alarm-Short: Short sound coming from the alarm.
Alarm-Long: Prolonged sound coming from the alarm.
3.6.2.3 Blind Detect Mode
This mode will be triggered when there is no video input (in total darkness) whether the
security camera is purposefully covered or it is directly exposed to intense light. This
detects if there is a deliberate attempt to hide the view of the camera. The light intensity
settings will have no effect when using the IR cameras.
Choose any of the following settings to adjust the sensitivity of blind detection:
Sensitivity OFF: No sensitivity
Sensitivity Low: Low sensitivity level
Sensitivity Normal: Normal sensitivity level
Sensitivity High: High sensitivity level
Sensitivity Highest: Highest sensitivity level
3.6.2.4 Blind Detect Alarm Mode
Select the alarm mode when the Blind Detect Mode is triggered.
Mute: No beep whatever loss of light or not.
Buzzer-Short: Beep shortly by buzzer on main board.
Buzzer-Long: Beep long by buzzer on main board.
Alarm-Short: Short sound coming from the alarm.
Alarm-Long: Prolonged sound coming from the alarm.
To Next Page
Loading...
Need help?
General
