48
3.8.3 Date/Time Setup
Date/Time Setup Menu sets relevant information on date and time.
3.8.3.1 Date Display Mode
Date Display Mode is used to choose a date format for the state information. The
allowable formats are YYYY/MM/DD, DD/MM/YYYY, and MM/DD/YYYY.
3.8.3.2 Time Set
“Time Set” is for adjusting the date and time.
Time Set [ 2010/06/14 11:28:22]
/ ( / ): Up / Down – Change the number
/(/): Move left/right to the character that needs to be changed
: Exit after confirmed setting
3.8.3.3 Time Zone
“Time Zone” is for adjusting time zone and location.
Date Display Mode [YYYY/MM/DD]
Time Set [2010/06/14 11:18:19]
Time Zone [GMT +08:00]
[Taipei]
Daylight Saving Time
Activate Daylight Saving [ Disable]
Time Starts [No definition]
Time Ends [No definition]
NTP Server
Activate Service [ Enable]
Server IP [time.stdtime.gov.tw]
Interval (Days) [3Day]
Synchronize Now
To Next Page
Loading...
Need help?
General
