27
3.5 Record Setup
Click “Record Setup” on the Main Menu.
3.5.1 Auto Record
Auto Record is utilized to set the period (OFF, 10Sec, 20Sec, 30Sec, 40Sec, 50Sec or
60Sec) within which the DVR will automatically start recording. Default value is “30Sec”.
This feature is particularly useful in automatically re-starting your DVR recording in case of
an abnormal shut down.
The DVR will not re-start recording when set this function “OFF”.
3.5.2 Activate Performance Gains
The function enables system auto increase the recording power to the heavy loading
channel from the not triggered or not recording channels.
Enable this function makes “Record Performance Gains” at “Channel Recording Setup”
is validated.
3.5.3 Record Schedule
Record Schedule is a menu charting the recording schedule of a particular channel or
all channels for the whole day (24 hours) and the entire week (7 days).
Default setting is “Time Record”.
Auto Record ◄30Sec►
Activate Performance Gains [ Enable ]
Record Schedule
Total Power : 240 / 240 (Power/Sec)
Auto Settings Adjustment
Channel Recording Setup
Channel Number
Record Resolution [Middle Res (Half D1)]
Video Quality [Standard]
Record Frame Rate [30]
Record Performance Gains [ YES]
To Next Page
Loading...
Need help?
General
