39
3.6.4 Sensor Setup
Sensor Setup is accessed to configure the sensor mode for each channel or all
channels.
NOTE Remember to set up the sensor mode recording for your desired
period on the “Record Schedule” menu in “Record Setup” after
completing “Sensor Setup”. Otherwise, the system will still be
recording in the default recording mode.
3.6.4.1 Record Detection Activate
This feature makes the whole setting of sensor setup is efficacious and system will log
the sensor triggered event even the DVR under the “Time Recording” mode.
Enable: Activates the whole setting of sensor setup
Disable: Deactivates the whole setting of sensor setup
3.6.4.2 Sensor Mode
This parameter enables or disables sensor mode detection.
Enable: Activates sensor mode
Disable: Deactivates sensor mode
3.6.4.3 Sensor Mapping
This feature is to easily mapping a sensor port to a particular channel without having to
remove any wires.
The default display when all channels are selected is: .
Channel Number
Alarm Setup
Motion Setup
Sensor Setup
Record Detection Activate [ Enable]
Sensor Mode [ Disable]
Sensor Mapping
Record Time [15Sec]
Alarm Mode [Mute]
Alarm Time [10Sec]
Trigger Full Screen [ OFF]
Trigger Type [Initial Trigger]
To Next Page
Loading...
Need help?
General
