38
3.6.3.6 Trigger Full Screen
Trigger Full Screen is the duration of the of full-screen display when a channel is triggered.
This may be set to a period between 1 to 30 seconds.
OFF: It will not display on full screen when the channel has been triggered. Also, the
trigger area will turn to a red color.
3.6.3.7 Trigger Type
There are two trigger types: Initial Trigger and Continuous Trigger.
Initial Trigger
When channel has been triggered, the triggering event will be displayed on full screen for
the duration of the setting period. During that period, this channel will ignore any other
triggering events.
Continuous Trigger:
When channel has been triggered, the triggering event will be displayed on full screen for
the duration of the setting period. The channel is, however, still actively monitoring during
that period. Should there be a new triggering event, this channel will display the more
recent event and restart the display period.
3.6.3.8 Motion Area Setup
The Motion Setup allows the user to block multi areas on screen for every single channel as
motion detection area.
Select a channel to set. Use the mouse or the (), (), (), () buttons to move
the area. After positioning, press “” or click right button of the mouse to save it.
CAUTION There will be no response in Motion Mode when the Motion Area
Setup has not been completed.
□□□□□□□□□□□□□□□□□□□□
□□□□□□□□□□□□□□□□□□□□
□□□□□□□□□□□□□□□□□□□□
□□□□□□□□□□□□□□□□□□□□
□□□□□□□□□□□██████□□□
□□□□□□□□□□□██████□□□
□□□□□□□□□□□██████□□□
□□□□□□□□□□□██████□□□
□□□□□□□□□□□□□□□□□□□□
To Next Page
Loading...
Need help?
General
