32
Video Resolution, Quality and Frame Rate Setting for each Channel
Resolution:
Press the button “◄ / ►” to adjust the resolution from CIF, Half D1 and D1 for
individual channel.
Quality:
Press the button “◄ / ►” to adjust the resolution from Lowest, Low, Standard, High
and Highest for individual channel.
Frame rate:
Press the button “◄ / ►” to adjust the frame rate from 0 to 30 for individual channel.
There is equal to not recording when setup the frame rate to 0.
3.5.5 Auto Settings Adjustment
This function can automatically allocate the recording power under the selected record
resolution.
When all the channels are set at the same resolution, the “Auto Settings Adjustment”
can automatically allocate the frame rate to every channel.
When the setting applies to a specific channel or to specific channels with a particular
resolution, video quality or frame rate the “Auto Settings Adjustment” feature
automatically allocates the remaining frame rate among the other channels.
3.5.6 Channel Recording Setup
The Channel Recording Setup is used to adjust the resolution, quality, frame rate and
performance gains of recording.
Total Power: 240/240 (Power/Sec)
Resolution Quality Frame rate
◄Half D1► [Standard] [15]
[ Half D1 ] [Standard] [15]
[ Half D1 ] [Standard] [15]
[ Half D1 ] [Standard] [15]
[ Half D1 ] [Standard] [15]
[ Half D1 ] [Standard] [15]
[ Half D1 ] [Standard] [15]
[ Half D1 ] [Standard] [15]
To Next Page
Loading...
Need help?
General
