36
3.6.2.5 Video Loss Mode
The Video Loss Mode is for detecting the loss of the camera video input.
Enable: Activates video loss detection
Disable: Deactivates video loss detection
3.6.2.6 Video Loss Alarm
Select the alarm mode when the Video Loss Mode is triggered.
Mute: No beep whatever video loss or not.
Buzzer-Short: Beep shortly by buzzer on main board.
Buzzer-Long: Beep long by buzzer on main board.
Alarm-Short: Short sound coming from the alarm.
Alarm-Long: Prolonged sound coming from the alarm.
3.6.3 Motion Setup
Motion Setup is accessed to configure the motion mode for each channel or all
channels.
NOTE Remember to setup the motion mode period on “Record Schedule” at
the main menu of “Record Setup” after completing “Motion Setup”.
Otherwise, the system will be recording in the default schedule
recording mode.
Channel Number
Alarm Setup
Motion Setup
Record Detection Activate [ Enable]
Motion Mode [Sensitivity Normal]
Record Time [10Sec]
Alarm Mode [Mute]
Alarm Time [10Sec]
Trigger Full Screen [ OFF]
Trigger Type [Initial Trigger]
Motion Area Setup
Sensor Setup
To Next Page
Loading...
Need help?
General
