23
Press the icon “ ” to enter the channel name. The channel name will appear on the
channel square.
Or you can define the name by using buttons on IR remote:
/ ( / ) – move up / down
/(/): move left / right to the character would like to select and press ” ” to
select it.
Rotation Time
Sets the period (with a range of 2 to 30sec) of full screen display for each channel.
3.4.2.5 Image Position Adjustment
Adjust the position of the display on the monitor.
Select the icon “ ” (for 8ch) to adjust the display position of all channels in 4/8-split
view at one time.
Select any of the “ ”, “ ”, “ ”, “ ”, “ ”, “ ”, “ ”, “ ” to individually set the image
position of each individual channel.
The following figure will show when enter the “Image Position Adjustment”:
[ _________________________ ]
▲
1 2 3 4 5 6 7 8 9 0 － ＝
q w e r t y u I o p [ ] \
A s d f g h j k l ; „
Z x c v b n m , . / ‟
[Space] [ Default Name]
To Next Page
Loading...