Endress+Hauser Analytik Jena multi EA 5000 - Displays in the Window Status Analyzer; Overview; Figure 65 Status Analyzer Window

Troubleshooting multi EA 5000
108
13.4 Displays in the window
Status analyzer
13.4.1 Overview
In the
Status analyzer
window, information on the device status or information on indi-
vidual modules is displayed.
TN liquid vertical (1) - liquid
Status analyzer multi EA 5000
Rack Syringe: 112 - : 50 µL
C-NDIR
N-CLD-5000
S-UVFD-5000
MFC 1
MFC 2
MFC 3
Furnace temperature
Cl-POT
OK
0.15
300
0
100
1050 °C
1
2
3
4
5
6
Figure65Status analyzer window
1 Window name and basic module 2 Active method and sample state
3 Sampling modules 4 Detectors with sensor values
5 Gas flow displays 6 Furnace temperature (horizontal
line – horizontal installation, vertical
line – vertical installation)
The displays in the
Status analyzer
window are color-coded. The colors have the follow-
ing meanings:
Color Description
Black Status of the corresponding component OK, device ready for measure-
ment
Gray Detector is inactive
Green Detector OK, device ready for measurement (OK)
Or
Detector busy, measurement can only be started once the routine is
complete (detector-specific)
Red Component not ready for measurement:
¡ Run-in period not yet complete; wait for run-in time to complete
¡ Error: Troubleshooting, access the corresponding information for
the component via the
System
|
Component test
menu item.