Endress+Hauser Analytik Jena multi EA 5000 - Figure 57 Components in the Basic Module; Figure 58 TOC Combustion Tube (Unfilled)

Carbon analysis with the TOC module multi EA 5000
92
1
2
3
Figure57Components in the basic module
1 TOC combustion tube injection port 2 Spherical joint (fasten with forked
clamp)
3 Condensation coil
TOC combustion tube
The TOC combustion tube (reactor) is used to determine the TC, TOC and NPOC param-
eters in water samples. The combustion tube is made of quartz glass and is filled with a
catalyst and additives. If the effectiveness of the catalyst decreases, the combustion tube
has to be filled again.
Figure58TOC combustion tube (unfilled)