Endress+Hauser Analytik Jena multi EA 5000 - Specifications; multi EA 5000 Technical Data

Specifications multi EA 5000
176
17 Specifications
17.1 Technical data for the multi EA 5000
General characteristics
Name on the basic module multi EA 5000
Dimensions (W x H x D) 510 x 470 x 550 mm
Mass 25 kg
Procedural data
Digestion principle ¡ Catalyst-free high-temperature in-
cineration
2-phase process for C/N/S/Cl, EOX,
EC/OC
1-phase process for AOX
¡ Catalyst-assisted incineration (with
the TOC module
)
¡ Wet chemical digestion (in the TIC
reactor of the TOC module
)
Digestion temperature 700 to 1100 °C
Measuring meth-
ods
Vertical and hori-
zontal
TS, TN, TX, TC, EOX
Horizontal: AOX, EC/OC
Vertical: TOC, TIC, NPOC
Sampling (vertical)
TS, TN, TX, TC Direct injection of liquids into the multi-purpose combus-
tion tube via injection port with septum
Direct injection of gases with a special, long injection nee-
dle into the multi-purpose combustion tube via injection
port with septum
EOX Direct injection of an extract into the multi-purpose com-
bustion tube via injection port with septum
TC, NPOC Direct injection of aqueous samples into the TOC combus-
tion tube via injection port with septum
TIC Direct injection of aqueous samples into the TIC reactor
via injection port with septum
Sampling (horizontal)
TS, TN, TX, TC Injection of liquids via injection port with septum (ABD) in
quartz glass boats or direct transfer of solid samples in
quartz glass boats into the multi-purpose combustion tube
Direct injection of liquids via injection port with septum
into the multi-purpose combustion tube
Injection of gaseous samples with a special, flexible injec-
tion cannula via injection port with septum (ABD
) into the
multi-purpose combustion tube
AOX Transfer of the loaded active carbon with a quartz con-
tainer (column method, max. 18x6mm columns) in the
quartz glass boat into the multi-purpose combustion tube