Endress+Hauser Analytik Jena multi EA 5000 - Figure 18 Space Required for the Basic Device and Modules (Vertical Operation)

multi EA 5000 Installation and commissioning
33
Component Width x Height x Depth
[mm]
Mass [kg] Arrangement
Autoinjector
(without syringe,
⌀xL)
Auto injector cou-
pling (⌀xL)
30 x 80 mm
80 x 110 mm
0.5 kg Installed on the basic
module, or on the
right of the basic
module
Autoinjector AI-EA 150 x 270 x 240 mm 1.5 kg On the basic module
GSS/LPG combi
module,
GSS module
or
LPG module 2.0
300 x 800 x 550 mm 11 kg/
12 kg
To the right of the
basic module or ABD
* For the temperature-controlled autosampler MMS-T and the Liquids kit TMP:
There is sufficient space provided for the inclusion of a thermostat (approx.
250 x 650 x 400 mm
).
Figure18Space required for the basic device and modules (vertical operation)