Endress+Hauser Analytik Jena multi EA 5000 User Manual

Function and design multi EA 5000
30
4.2.2 Manual Boat Drive (MBD)
The MBD is used for the manual transfer is samples on the sample boat to the combus-
tion tube. The user determines the transfer speed and thus the introduction of the sam-
ple into the combustion zone. The MBD may only be used in horizontal operation mode
for inert, non-reactive solids (e.g., SiO
2
) and AOX samples.
The MBD may not be used for the following analyses:
¡ Organic liquids and solids
¡ Gases and LPG
¡ EOX
¡ Water analyses (TOC/TC/TIC/NPOC)
¡ EC/OC
The MBD may not be combined with the autosampler or the flame sensor.

Endress+Hauser Analytik Jena multi EA 5000 Specifications

General

Brand	Endress+Hauser
Model	Analytik Jena multi EA 5000
Category	Measuring Instruments
Language	English