Endress+Hauser Analytik Jena multi EA 5000 - Figure 12 Gas Connections at the Rear of the Device

Function and design multi EA 5000
26
Gas connections at the rear of
the device
The gas connections are located on the rear of the device. The gas supplies for oxygen
and argon must be connected to the "IN O
2
" or "IN Ar" connection via the included con-
nection hoses (AD 6 mm
, ID 4 mm.
1
2
3
4
5
Figure12Gas connections at the rear of the device
1 Argon gas inlet (Ar) 2 Gas outlet to the N/S/C module
3 Purge gas outlet of the membrane
dryer with "exhaust" filter
4 Oxygen gas inlet (O
2
)
5 Gas outlet to the ABD
Gas connections on the gas box
The two process gases, argon and oxygen, are controlled via the gas box in the basic
module. The gas box is located on the left side of the device.