EasyManua.ls Logo

Endress+Hauser Analytik Jena multi EA 5000 - Page 177

Endress+Hauser Analytik Jena multi EA 5000
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
multi EA 5000 Specifications
177
Transfer of the loaded, filtered active carbon without a
quartz container (vibration method, with polycarbonate
filters) in the quartz boat with holding-down clamp into
the multi-purpose combustion tube
EOX Injection of an extract via injection port with septum
(ABD
) into quartz glass boats and transfer into the multi
purpose combustion tube
EC/OC Transfer of the quartz-fiber filters or partial filters con-
taining deposits in the quartz glass boat with holding-
down clamp into the multi-purpose combustion tube
Sample volume
TS, TN, TX, TC,
TOC
Liquids 1 to 100 µl (horizontally with ABD)
1 to 500 µl (vertically with MMS or
TOC module
and direct manual dosing)
Solids 0.001 to 110 mg
Non-pressurized
gases
1 to 100 ml
Pressurized gases 1 to 20 ml (with
GSS/LPG combi module
)
1 to 100 ml (with GSS module and
GSS adapterbox
)
LPG 1 to 50 µl
EOX (extract) 10 to 100 µl
TOC (aqueous samples) 10 to 500 µl
Dosing speed (vertical)
TS, TN, TX, TC Liquids 0.2 to 2 µl/s
Recommended: 0,5 µl/s
Non-pressurized
gases
1 to 40 ml/min
Recommended: 20 ml/min
Pressurized gases Fixed (with GSS/LPG combi module)
1 to 40 ml/min
Recommended: 20 ml/min (with
GSS module
and GSS adapterbox)
LPG Solid
EOX 0.2 to 2 µl/s
Recommended: 0.5 µl/s
TC, NPOC 100 to 700 µl/s
Recommended: 350 µl/s
or manually adjusted
TIC Manually adjusted

Table of Contents

Related product manuals