Endress+Hauser MODBUS RS485 User Manual

Operation Proline Promag 53 MODBUS RS485
54 Endress+Hauser
5.2 Local display
5.2.1 Display and operating elements
The local display enables you to read important parameters directly at the measuring point or to
configure your device using the "Quick Setup" or the function matrix.
The display consists of four lines; this is where measured values and/or status variables (direction
of flow, empty pipe, bar graph, etc.) are displayed. You can change the assignment of display lines
to variables at will in order to customize the display to suit your needs and preferences (→ see the
"Description of Device Functions" manual).
a0001172
Fig. 38: Display and operating elements
1 Liquid crystal display
The backlit, four-line liquid crystal display shows measured values, dialog texts, fault messages and notice
messages. The display as it appears when normal measuring is in progress is known as the HOME position
(operating mode display).
2 Optical sensors for Touch Control
3 O/ S keys
– HOME position → Direct access to totalizer values and actual values of inputs/outputs
– Enter numerical values, select parameters
– Select different blocks, groups and function groups within the function matrix
Press the X keys simultaneously to trigger the following functions:
– Exit the function matrix step by step → HOME position
– Press and hold down the X keys for longer than 3 seconds → Return directly to the HOME position
–Cancel data entry
4 F key (Enter key)
– HOME position → Entry into the function matrix
– Save the numerical values you input or settings you change
+24.502
+1863.97
x
y
–50
+50
%
v
v
3
S
Esc
E
+
-
1
2
34
x
y
+24.502
+1863.97
x
y
–50
+50
%
v
v
3
S
x
y

Endress+Hauser MODBUS RS485 Specifications

General

Brand	Endress+Hauser
Model	MODBUS RS485
Category	Measuring Instruments
Language	English