Technical data Proline Promag 53 MODBUS RS485
132 Endress+Hauser
10.1.11 Human interface
Display elements • Liquid crystal display: illuminated, four lines with 16 characters per line
• Selectable display of different measured values and status variables
• 3 totalizers
• At ambient temperatures below –20 °C the readability of the display may be impaired.
Operating elements • Local operation with three optical keys (S/O/F)
• Application-specific Quick Setup menus for straightforward commissioning
Language groups Language groups available for operation in different countries:
• Western Europe and America (WEA):
English, German, Spanish, Italian, French, Dutch and Portuguese
• Eastern Europe and Scandinavia (EES):
English, Russian, Polish, Norwegian, Finnish, Swedish, Czech
• South and east Asia (SEA):
English, Japanese, Indonesian
•China (CN):
English, Chinese
!
Note!
You can change the language group via the operating program "FieldCare".
10.1.12 Certificates and approvals
CE mark The measuring system complies with the legal requirements of the EU directives. Endress+Hauser
confirms that the device has been tested successfully by affixing the CE mark to it.
C-tick mark The measuring system is in conformity with the EMC requirements of the "Australian
Communications and Media Authority (ACMA)".
Ex approval Information about currently available Ex versions (ATEX, FM, CSA, TIIS, IECEx, NEPSI etc.) can
be supplied by your Endress+Hauser Sales Center on request. All explosion protection data are
given in a separate documentation which is available upon request.
Sanitary compatibility Promag W and Promag P
No applicable approvals or certification
Promag H
• 3A-approval and EHEDG-tested
• Seals: FDA-compliant (except for Kalrez seals)
Drinking water approval Promag W
• WRAS BS 6920
•ACS
•NSF 61
•KTW/W270
Promag P
•ACS
To Next Page
Loading...
Need help?
General
