Proline Promag 53 MODBUS RS485 Operation
Endress+Hauser 73
5.6 Operating options
5.6.1 FieldCare
Fieldcare is Endress+Hauser’s FDT-based plant Asset Management Tool and allows the
configuration and diagnosis of intelligent field devices. By using status information, you also have a
simple but effective tool for monitoring devices. The Proline flow measuring devices are accessed
via a service interface or via the service interface FXA193.
5.6.2 Device drivers for operating programs
The following table illustrates the suitable device drivers for the operating tool in question and then
indicates where these can be obtained.
Operation via service protocol:
Tester/simulator:
!
Note!
The Fieldcheck tester/simulator is used for testing flowmeters in the field. When used in
conjunction with the "FieldCare" software package, test results can be imported into a database,
printed and used for official certification. Contact your Endress+Hauser representative for more
information.
Valid for device software: 3.04.XX
Software release: 07.2009
→ "DEVICE SOFTWARE" function (8100)
Operating program/Device driver: How to acquire:
FieldCare / DTM • www.endress.com → Download
• CD-ROM (Endress+Hauser order number 56004088)
• DVD (Endress+Hauser order number 70100690)
Device: How to acquire:
Fieldcheck Update via FieldCare using the Flow Device FXA193/291 DTM in the
Fieldflash module
To Next Page
Loading...
Need help?
General
