Proline Promag 53 MODBUS RS485 Accessories
Endress+Hauser 95
8.3 Service-specific accessories
Accessory Description Order code
Applicator Software for selecting and configuring flowmeters.
Applicator can be downloaded from the Internet or
ordered on CD-ROM for installation on a local PC.
Contact your
Endress+Hauser representative for more information.
DKA80 – *
Fieldcheck Tester/simulator for testing flowmeters in the field.
When used in conjunction with the "FieldCare" software
package, test results can be imported into a database,
printed and used for official certification.
Contact your Endress+Hauser representative for more
information.
50098801
FieldCare FieldCare is Endress+Hauser's FDT-based plant Asset
Management Tool. It can configure all the intelligent
field units in your system and helps you manage these
units. By providing status information, it is also a simple
but effective method of controlling the units' status.
See the product page on the
Endress+Hauser website:
www.endress.com
FXA193 The FXA193 service interface connects the device to the
PC for configuration via FieldCare.
FXA193 – *
Memograph M graphic
display recorder
The Memograph M graphic display recorder provides
information on all the relevant process variables.
Measured values are recorded correctly, limit values are
monitored and measuring points analyzed. The data are
stored in the 256 MB internal memory and also on a
DSD card or USB stick.
Memograph M boasts a modular design, intuitive
operation and a comprehensive security concept. The
ReadWin
®
2000 PC software is part of the standard
package and is used for configuring, visualizing and
archiving the data captured.
The mathematics channels which are optionally available
enable continuous monitoring of specific power
consumption, boiler efficiency and other parameters
which are important for efficient energy management.
RSG40-************
To Next Page
Loading...
Need help?
General
