Endress+Hauser Proline Promag L 400 - Page 115

Proline Promag L 400 PROFIBUS DP Diagnostics and troubleshooting
Endress+Hauser 115
Extended order code 1
Extended order code 2
Extended order code 3
ENP version
PROFIBUS ident number
Status PROFIBUS Master Config
IP address
Subnet mask
Default gateway
Parameter overview with brief description
Parameter Description User interface Factory setting
Device tag Enter the name for the measuring point. Max. 32 characters, such as
letters, numbers or special
characters (e.g. @, %, /)
Promag 400 DP
Serial number Displays the serial number of the measuring
device.
Max. 11-digit character string
comprising letters and
numbers.
79AFFF16000
Firmware version Displays the device firmware version
installed.
Character string with the
following format:
xx.yy.zz
01.00
Device name Displays the name of the transmitter. Character string composed of
letters, numbers and certain
punctuation marks.
Promag 400 DP
Order code Displays the device order code. Character string composed of
letters, numbers and certain
punctuation marks
–
Extended order code 1 Displays the 1st part of the extended order
code.
Character string –
Extended order code 2 Displays the 2nd part of the extended order
code.
Character string -
Extended order code 3 Displays the 3rd part of the extended order
code.
Character string -
ENP version Displays the version of the electronic
nameplate.
Character string in the format
xx.yy.zz
2.02.00
PROFIBUS ident number 0 to 65 535 5 474
Status PROFIBUS Master Config • Active
• Not active
Not active
IP address Displays the IP address of the Web server of
the measuring device.
4 octet: 0 to 255 (in the
particular octet)
192.168.1.212