Endress+Hauser Proline Promag L 400 - Disabling the Web Server; Logging out

Proline Promag L 400 PROFIBUS DP Operation options
Endress+Hauser 63
Functions Meaning
Network
configuration
Configuration and checking of all the parameters required for establishing the connection
to the device:
• Network settings (e.g. IP address, MAC address)
• Device information (e.g. serial number, firmware version)
Logout End the operation and call up the login page
Navigation area
If a function is selected in the function bar, the submenus of the function open in the
navigation area. The user can now navigate through the menu structure.
Working area
Depending on the selected function and the related submenus, various actions can be
performed in this area:
• Configuring parameters
• Reading measured values
• Calling up help text
• Starting an upload/download
8.4.6 Disabling the Web server
The Web server for the measuring device can enabled and disabled as required via the
Web server functionality parameter.
Navigation
"Expert" menu → Communication → Web server
Parameter overview with brief description
Parameter Description Selection Factory setting
Web server functionality Switch the Web server on and off. • Off
• On
On
Enabling the Web server
If the Web server is disabled it can only be re-enabled with the Web server functionality
parameter via the following operating options:
• Via local display
• Via "FieldCare" operating tool
8.4.7 Logging out
Before logging out, perform a data backup via the Data management function
(upload configuration from device) if necessary.
1. Select the Logout entry in the function row.
 The home page with the Login box appears.
2. Close the Web browser.
3. Reset the modified properties of the Internet protocol (TCP/IP) if they are no longer
needed (→  61).