Endress+Hauser Proline Promag L 400 - Access to the Operating Menu Via the Operating Tool; Connecting the Operating Tool

Operation options Proline Promag L 400 PROFIBUS DP
64 Endress+Hauser
8.5 Access to the operating menu via the operating tool
The structure of the operating menu in the operating tools is the same as for operation via
the local display.
8.5.1 Connecting the operating tool
Via PROFIBUS DP network
1 2
3
444
A0020903
1 Automation system
2 Computer with PROFIBUS network card
3 PROFIBUS DP network
4 Measuring device
Via service interface (CDI-RJ45)
1
32
A0023114
1 Computer with Web browser (e.g. Internet Explorer) for accessing the integrated device Web server or with
"FieldCare" operating tool with COM DTM "CDI Communication TCP/IP"
2 Standard Ethernet connecting cable with RJ45 plug
3 Service interface (CDI -RJ45) of the measuring device with access to the integrated Web server