Endress+Hauser Proline Promag L 400 - Calling up Help Text

Proline Promag L 400 PROFIBUS DP Operation options
Endress+Hauser 57
Navigation path
"Expert" menu → Direct access
The direct access code consists of a 4-digit number and the channel number, which
identifies the channel of a process variable: e.g. 0914-1. In the navigation view, this
appears on the right-hand side in the header of the selected parameter.
1
0914-2
A0017223
1 Direct access code
Note the following when entering the direct access code:
• The leading zeros in the direct access code do not have to be entered.
Example: Input of "914" instead of "0914"
• If no channel number is entered, channel 1 is jumped to automatically.
Example: Input of "0914" → Parameter Totalizer 1
• If a different channel is jumped to: Enter the direct access code with the corresponding
channel number.
Example: Input of "0914-2" → Parameter Totalizer 2
For the direct access codes of the individual parameters
8.3.8 Calling up help text
For some parameters, help texts exist, which the user can call up from the navigation view.
These briefly describe the function of the parameter and thus support fast and reliable
commissioning.
Calling up and closing the help text
The user is in the navigation view and the selection bar is on a parameter.
1. Press  for 2 s.
 The help text for the selected parameter opens.
Ent.accesscode
Enteraccesscodetodisable
writeprotec.
A0014002-EN
 22 Example: Help text for parameter "Enter access code"
2. Press  +  simultaneously.
 The help text is closed.