Endress+Hauser Proline Promag L 400 - Local Display Operation

Proline Promag L 400 PROFIBUS DP Operation options
Endress+Hauser 49
8.3 Access to the operating menu via the local display
8.3.1 Operational display
X X X X X X XX X
4
2
1
3
5
l/h
1120.50
F
A0016502
1
2
3
4
5
Operational display
Device tag (→  77)
Status area
Display area for measured values (4-line)
Operating elements (→  53)
Status area
The following symbols appear in the status area of the operational display at the top right:
• Status signals(→  102)
– F: Failure
– C: Function check
– S: Out of specification
– M: Maintenance required
• Diagnostic behavior(→  103)
– : Alarm
– : Warning
• : Locking (the device is locked via the hardware (→  92))
• : Communication (communication via remote operation is active)
Display area
In the display area, each measured value is prefaced by certain symbol types for further
description:
Measured variables
Symbol Meaning
Volume flow
Conductivity
Mass flow
Totalizer

The measurement channel number indicates which of the three totalizers is
displayed.
Status input