Accessories Proline Promag L 400 PROFIBUS DP
120 Endress+Hauser
15 Accessories
Various accessories, which can be ordered with the device or subsequently from Endress
+Hauser, are available for the device. Detailed information on the order code in question is
available from your local Endress+Hauser sales center or on the product page of the
Endress+Hauser website: www.endress.com.
15.1 Device-specific accessories
15.1.1 For the transmitter
Accessories Description
Display protection Is used to protect the display against impact or scoring from sand in desert areas.
For details, see Special Documentation SD00333F
Connecting cable for
remote version
Coil current and electrode cables, various lengths, reinforced cables available on
request.
Ground cable Set, consisting of two ground cables for potential equalization.
Post mounting kit Post mounting kit for transmitter.
Compact → remote
conversion kit
For converting a compact device version to a remote device version.
Promag 50/53 → Promag
400 conversion kit
For converting a Promag with transmitter 50/53 to a Promag 400.
15.1.2 For the sensor
Accessories Description
Ground disks Are used to ground the fluid in lined measuring tubes to ensure proper
measurement.
For details, see Installation Instructions EA00070D
15.2 Service-specific accessories
Accessories Description
Applicator Software for selecting and sizing Endress+Hauser measuring devices:
• Calculation of all the necessary data for identifying the optimum flowmeter: e.g.
nominal diameter, pressure loss, accuracy or process connections.
• Graphic illustration of the calculation results
Administration, documentation and access to all project-related data and
parameters throughout the entire life cycle of a project.
Applicator is available:
• Via the Internet: https://wapps.endress.com/applicator
• On CD-ROM for local PC installation.
To Next Page
Loading...
