Endress+Hauser Proline Promag L 400 - Page 142

Technical data Proline Promag L 400 PROFIBUS DP
142 Endress+Hauser
AS 2129
Carbon steel, A105/FE410WB/P235GH/P265GH/S235JRG2
AS 4087
Carbon steel, A105/P265GH/S275JRG2
Seals
In accordance with DIN EN 1514-1
Accessories
Display protection
Stainless steel, 1.4301 (304L)
Ground disks
• Stainless steel, 1.4435 (316L)
• Alloy C22, 2.4602 (UNS N06022)
Fitted electrodes Measurement, reference and empty pipe detection electrodes available as standard with:
• 1.4435 (316L)
• Alloy C22, 2.4602 (UNS N06022)
Process connections • EN 1092-1 (DIN 2501)
– DN ≤ 300: lap joint flange (PN 10/16), lap joint flange, stamped plate (PN 10) = form
A
– DN ≥ 350: fixed flange (PN 6/10) = flat face
• ASME B16.5
– DN ≤ 300 (12"): lap joint flange (Class 150)
– DN ≥ 350 (14"): fixed flange (Class 150)
• AWWA C207
DN 48 to 90": fixed flange (Class D)
• AS 2129
DN 350 to 1200: fixed flange (Table E)
• AS 4087
DN 350 to 1200: fixed flange (PN 16)
For information on the materials of the process connections (→  141)
Surface roughness Electrodes with 1.4435 (316L); Alloy C22, 2.4602 (UNS N06022):
≤ 0.3 to 0.5 µm (11.8 to 19.7 µin)
(All data relate to parts in contact with fluid)