Endress+Hauser Proline Promag L 400 - Page 93

Proline Promag L 400 PROFIBUS DP Commissioning
Endress+Hauser 93
the -symbol appears in front of the parameters in the header of the operational
display and in the navigation view.
X X X X X X XX X
20.50
XX
XX
A0015870
If hardware write protection is disabled, no option is displayed in the Locking
status parameter (→  94). On the local display, the -symbol disappears
from in front of the parameters in the header of the operational display and in
the navigation view.
3. WARNING! Excessive tightening torque applied to the fixing screws! Risk of
damaging the plastic transmitter. Tighten the fixing screws as per the tightening
torque (→  29).
Reverse the removal procedure to reassemble the transmitter.