Operation Proline Promag L 400 PROFIBUS DP
98 Endress+Hauser
Parameter overview with brief description
Parameter Description Selection / User entry Factory setting
Assign channel 1 to 4 Assign process variable to logging channel. • Off
• Volume flow
• Mass flow
• Flow velocity
• Conductivity
• Electronic temperature
Off
Logging interval Define the logging interval for data logging.
This value defines the time interval between
the individual data points in the memory.
1.0 to 3 600.0 s 10.0 s
Clear logging data Clear the entire logging data. • Cancel
• Clear data
Cancel
To Next Page
Loading...
