Note:
❏ If originals are jammed or are not fed correctly, enabling Slow mode may improve feeding.
❏ Alternatively, you can scan originals of dierent paper sizes and types by loading them one by one using Automatic
Feeding Mode.
Placing a Mixture of Originals at Dierent Sizes
1.
Extend the input tray extension. Slide out the output tray, extend the output tray extension, and then raise the
stopper.
Note:
If there are any thick originals, to stop them from bumping into the output tray and falling out, store the output tray and
do not use it to stack the ejected originals.
2.
Slide the edge guides on the input tray all the way out.
Specications and Placing of Originals
>
Placing Originals
>
Mixture of Originals
67
To Next Page
Loading...
