Epson DS-790WN - Page 74

Destination Menu Options for Scanning to a Folder
Keyboard:
Open the Edit Location screen. Enter the folder path and set each item on the screen.
❏ Communication Mode
Select the communication mode for the folder.
❏ Location (Required)
Enter a folder path in which to save the scanned image. Enter the folder path in the following
format.
When using SMB: \\host name\folder name
When using FTP: p://host name/folder name
When using FTPS: ps://host name/folder name
When using WebDAV (HTTP): http://host name/folder name
When using WebDAV (HTTPS): https://host name/folder name
❏ User Name
Enter a user name to log on to the specied folder.
❏ Password
Enter a password corresponding to the user name.
❏ Connection Mode
Select the connection mode for the folder.
❏ Port Number
Enter a port number for the folder.
❏ Proxy Server Settings:
Select whether or not to use a proxy server.
Contacts:
Select a folder in which to save the scanned image from the contacts list.
Scan Menu Options for Scanning to a Folder
Note:
e items may not be available depending on other settings you made.
Image Type:
Select the color of the output image.
When you select the following, the scanner detects the color of the originals automatically and saves
the images using the detected colors.
❏ Color/Grayscale/B&W
Converts the scanned image into 24-bit color, 8-bit gray, or monochrome (black and white
binary). When this is selected, set the sensitivity to determine whether the original is grayscale or
monochrome when scanning a non-color original.
❏ Color/Grayscale:
Converts the scanned image into 24-bit color or 8-bit gray.
Scanning > Scanning Using the Scanner's Control Panel > Scanning to a Network Folder
74