Epson EM-C800 - Starting a Scan Using the Epson Scan 2 Icon

108
3. Select Scan.
4. Select To Network Folder/FTP.
5. Do one of the following:
• Choose a saved location on the Destination tab.
• Then select the Location (Required) field, enter the folder location, and select OK. Enter other
information as necessary.
Enter the folder path name for the location setting in one of the following formats depending on the
Communication Mode setting you selected:
• SMB: \\host name\folder name
• FTP: ftp://host name/folder name
• FTPS: ftps://host name/folder name
• WebDAV (HTTPS): https://host name/folder name
• WebDAV (HTTP): http://host name/folder name
6. Select Scan Settings.
7. Select File Format to choose the file format for your scan.
8. Scroll down to select File Name and change it if necessary.
9. Select any additional scan settings as necessary.
10. Select to save your scan settings.
Note: Presets can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
11. Select the Save icon.
Your product scans your original and saves it in the selected location.
Parent topic: Setting Up and Scanning to a Network Folder or FTP Server
Starting a Scan Using the Epson Scan 2 Icon
You can start the Epson Scan 2 program to select scan settings, scan, and save the scanned image to a
file.