337
Copies Have Incorrect or Faint Colors
If your copies have incorrect, uneven, smeared, or faint colors, try these solutions:
• Run a print head nozzle check to see if any of the nozzles are clogged. Then clean the print head, if
necessary.
• Do not press too hard on the original or the document cover when you copy from the scanner glass.
• Clean the scanner glass with a soft, dry, lint-free cloth or use a small amount of glass cleaner on the
cloth, if necessary. Paper towels are not recommended.
Caution: Do not spray glass cleaner directly on the scanner glass.
• Clean the ADF.
• Wipe any dirt or dust off of your originals.
• If the colors are smeared, try lowering the copy density setting on the LCD screen.
• Make sure your paper is not curled.
Parent topic: Solving Copy Quality Problems
Position, Size, or Margins of Copies are Incorrect
If the position, size, or margins of your copies are incorrect, try these solutions:
• When placing originals in the ADF, make sure the edge guides are against the edges of the paper.
• When placing originals on the scanner glass, make sure the original is placed correctly for scanning.
Align the corner of the original with the corner indicated by the symbol on the scanner glass. If
necessary, move the original away from the edges of the scanner glass slightly.
• Clean the scanner glass and ADF.
• Make sure the paper is loaded in the correct direction and that the edge guides are against the edges
of the paper.
• Select the appropriate original size copy setting on the LCD screen.
Parent topic: Solving Copy Quality Problems
Solving Paper Problems
Check these sections if you have problems using paper with your product.
Paper Feeding Problems
Originals Do Not Feed From the Automatic Document Feeder
To Next Page
Loading...
