280
Setting Description
Password Specifies the password for the Wi-Fi Direct network.
Note: Changing the password will disconnect any devices
currently connected to the network.
Frequency Range Selects the frequency range used by the Wi-Fi Direct
network.
IP Address Specifies the IP address for the Wi-Fi Direct network. If set to
Manual, enter the IP address in the provided fields.
Parent topic: Managing the Network Connection
Setting Control Panel Options
You can configure the behavior of the product control panel using the Web Config interface or the menus
on the control panel.
1. Enter the IP address of the product in a web browser and log into Web Config as an administrator.
2. Select Device Management > Control Panel and set the following items as necessary:
• Language: Sets the display language
• Panel Lock: Requires an administrator login to access some menu settings on the control panel.
The administrator password must be set to enable this feature.
• Operation Timeout: Cancels operations and automatically logs out users after a selected time
period. You can select a time period between 10 seconds and 240 minutes.
Parent topic: Configuring Product Settings
Sending Email Notifications
You can set up email notifications that will be sent when an event occurs on the product. You can
register up to five destinations.
Note: You must have configured a mail server before setting up notifications.
1. Enter the IP address of the product in a web browser and log into Web Config as an administrator.
2. Select the Device Management tab, then select Email Notification.
To Next Page
Loading...
