227
2. Press the home button, if necessary.
3. Select Fax Box > Stored Documents.
4. Select the Menu icon.
5. Select Store Fax Data.
6. Select any other fax settings as necessary and select the Store icon.
Your document is scanned, stored, and briefly previewed.
7. When you are ready to send the document, press the home button, if necessary, and select Fax
Box.
8. Select Stored Documents.
9. Select the stored fax job you want to send.
10. Select Start Sending.
A confirmation message appears.
11. If you want to delete the document after it is sent, select Yes.
12. Specify the recipient.
13. Review the displayed settings and make any necessary changes.
14. Select the Send icon.
You can store only one document at a time. Subsequent documents overwrite the existing document.
Parent topic: Sending Faxes from the Product Control Panel
Dialing Fax Numbers from a Connected Telephone
If you have connected a telephone to the EXT port on your product, you can send a fax by dialing the fax
number from the connected telephone. If the recipient's phone number and fax number are the same,
you can speak to the recipient before sending the fax.
Note: When you dial a number using the connected telephone, it takes longer to send a fax because the
printer simultaneously scans and sends. While sending the fax, you cannot use the other features.
1. Place your original on the product for faxing.
2. Press the home button, if necessary.
To Next Page
Loading...
