314
1. Access Web Config as an administrator and select Network Security .
2. Select CA Certificate.
3. Locate the certificate you want to remove and click the Delete button next to it.
4. Click OK to confirm the deletion.
5. Click Reboot Network, and then check that the deleted CA Certificate is not listed on the updated
screen.
Parent topic: Using a Digital Certificate
Setting Up Universal Print (Microsoft)
You can set up your product for use with Universal Print if you are using Microsoft 365 and Azure Active
Directory.
Note: This feature is supported on Windows 10 2004 (20H1) or later. Visit the Microsoft website for more
information.
1. Access Web Config as an administrator and select the Network tab.
2. Select Universal Print.
3. Select Register.
4. Follow the on-screen instructions to register your product.
If Web Config shows Registered as the registration status, then setup is complete.
Parent topic: Administering Your Product
Using Epson Device Admin Configuration Software
With Windows, you can discover and monitor remote devices, and configure network settings in a batch
operation. See the Epson Device Admin help for instructions.
To install Epson Device Admin, download the software from the support page at and follow the on-
screen instructions.
Parent topic: Administering Your Product
To Next Page
Loading...
