Epson EM-C800 - Importing Settings Using Web Config; Updating Firmware Using Web Config; Synchronizing the Date and Time with a Time Server

283
Importing Settings Using Web Config
You can import settings to your product that you have exported previously. If encryption was used when
the settings were exported, obtain the necessary password before you import.
Note: When importing values that include individual information such as a printer name or IP address,
make sure the same IP address does not already exist on the same network.
1. Log in to the Web Config interface as an administrator.
2. Select the Device Management tab, then select Import under Export and Import Setting Value.
3. Click Browse and select the exported settings file.
4. If necessary, enter the decryption password.
5. Click Next.
6. Select the settings to import and click Next.
7. Click OK.
The selected settings are imported to the product.
Parent topic: Importing and Exporting Product Settings
Updating Firmware Using Web Config
If your product is connected to the Internet, you can update the product firmware using Web Config.
1. Log in to the Web Config interface as an administrator.
2. Select Device Management > Firmware Update.
3. Click Start to check for the latest firmware.
4. If there is a firmware update, click Start to begin the update.
Note: Make sure the product is not in use and clear any errors on the LCD screen before starting the
update. You can also schedule a firmware update by selecting Automatic Firmware Update from
the menu.
Parent topic: Configuring Product Settings
Synchronizing the Date and Time with a Time Server
You can synchronize the product with an NTP time server to set the date and time on the product.