226
2. Press the home button, if necessary.
3. Select Menu > Fax Box.
4. Select Polling Send/Board.
5. Select one of the boxes named Unregistered Bulletin Board.
Note: If a password entry screen is displayed, enter the password.
6. Enter information for the following settings:
• Enter a name in the Name (Required) setting.
• Enter a subaddress in the Subaddress(SEP) setting.
• Enter a password in the Password(PWD) setting.
7. Make the appropriate settings such as Notify Send Result.
Note: If you set a password in Box Open Password, you will be asked to enter the password from
the next time you open the box.
8. Select OK to apply the settings.
9. To store a document in a bulletin board box, select Fax Box > Polling Send/Board.
10. Select a registered bulletin board box. If the password entry screen is displayed, enter the password
to open the box.
11. Select Add Document.
12. Review the displayed Fax Settings. Make any necessary changes.
13. Select the Store icon.
Your document is scanned and stored until you overwrite or delete it.
You can store only one document at a time in a bulletin board box. Subsequent documents overwrite the
existing document. You can also delete a stored document from the Job/Status screen.
Parent topic: Sending Faxes from the Product Control Panel
Sending a Stored Fax
You can store up to 200 pages of a single black-and-white scanned document and up to 200 documents
in the Stored Documents area of the Fax Box. (Depending on the size of saved documents, you may
not be able to save 200 documents.)
1. Place your original on the product for faxing.
To Next Page
Loading...
