Epson EM-C800 - Working with Audit Logs; Restricting PDL File Operations; Enabling Program Verification on Start up

290
1. Log in to the Web Config interface as an administrator.
2. Select the Product Security tab and select Password Encryption.
3. Select On and select OK.
A message appears about restarting the product. Select OK.
4. Turn the product off and then on again to apply the password encryption setting.
Note: The product may take longer than usual to turn on. This is normal.
Parent topic: Configuring Security Settings
Working with Audit Logs
You can enable the Audit Log feature or export audit log data using the Web Config interface. Audit logs
can be used to track security issues or identify improper usage.
1. Log in to the Web Config interface as an administrator.
2. Select the Product Security tab, then select the Audit Log setting.
3. Select ON and then click OK to enable the audit log feature.
4. Select Export to export the audit log data to a CSV file, or select Delete to delete all audit logs.
Parent topic: Configuring Security Settings
Restricting PDL File Operations
You can protect files from unauthorized PDL operations using the Web Config interface.
1. Log in to the Web Config interface as an administrator.
2. Select the Product Security tab, then select the File Operations from PDL setting.
3. Select Allowed or Not Allowed to enable or disable PDL file operations and select OK to apply your
setting.
Parent topic: Configuring Security Settings
Enabling Program Verification on Start Up
Your product automatically checks whether unauthorized third parties have tampered with the program
when the product starts up. If it detects that the product has been rewritten with invalid firmware, it will
stop and update the firmware.