Epson EM-C800 - Scanning to Email

97
5. Select one of the following Scan to options:
• Network Folder/FTP saves your scanned file to a specified folder on a network.
• Email lets you send scanned files through a pre-configured email server.
• Computer lets you scan to a connected computer using Document Capture Pro (Windows) or
Document Capture (Mac).
• Memory Device saves your scanned file on a USB device and lets you select the file format,
quality, and other settings.
• Cloud sends your scanned files to a destination that you have registered with Epson Connect.
• WSD lets you manage network scanning in Windows 11, Windows 10, Windows 8.x, or Windows
7. To use this feature, you must first set up a WSD (Web Services for Devices) port on your
Windows 7 computer (the port is set up automatically on Windows 11, Windows 10, and Windows
8.x).
6. Follow the instructions in the links below to complete your scan.
Scanning to Email
Scanning to a Connected Computer
Scanning to a Memory Device
Scanning to the Cloud
Setting Up a WSD Port (Windows 7)
Control Panel Scanning Options
Parent topic: Starting a Scan
Scanning to Email
You can scan an original and email the scanned file using your product's control panel. You need to
have a preconfigured email server before you can scan to email. You can enter email addresses directly
on the product's control panel or select them from the Recipient tab. Make sure the date and time are
set correctly so the time stamps on your emails are accurate.
1. Place your original on the product for scanning.
Note: To scan a double-sided or multi-page document, place all of the pages in the ADF.
2. Press the home button, if necessary.
3. Select Scan.
4. Select Email.