99
5. Select Select Computer to choose a computer to scan to, and select it when it appears.
Note: The computer you want to scan to must be on the same network as the product or connected
to the product with a USB cable.
The Select Job screen appears.
6. Select one of the scan job options.
Note: The default scan job is Scan to PDF. Any additional scan job options must be added in
Document Capture Pro (Windows) or Document Capture (Mac).
7. Select the Save icon.
Document Capture Pro (Windows) or Document Capture (Mac) scans the original to the connected
computer.
Parent topic: Starting a Scan Using the Product Control Panel
Scanning to a Memory Device
You can scan an original and save the scanned image to an external USB device connected to your
product.
1. Insert an external USB device into the product's USB port.
2. Place your original on the product for scanning.
Note: To scan a double-sided or multi-page document, place all of the pages in the ADF.
3. Press the home button, if necessary.
4. Select Scan.
5. Select Memory Device.
6. Select the settings as necessary.
7. Select to save your scan settings as a preset.
Note: Presets can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
8. Select the Save icon.
Your product scans your original and saves the scanned file to the connected memory device.
To Next Page
Loading...
