Epson EM-C800 - IP Fax Destination Examples

221
1. Place the originals.
2. Select Fax on the printer home screen.
3. Specify the recipients to send the fax to on the Recipient tab.
To enter the destination manually, select Keypad, and then from Select Line, select the IP-FAX
line. Enter the destination directly using the numerical keypad on the screen
Note:
• You cannot directly enter a destination that contains characters that cannot be entered using the
numeric keypad. Register the address to your contacts list in advance, and then specify the
destination from the contacts list.
• When Security Settings in Direct Dialing Restrictions is enabled, you can only select fax
recipients from the contacts list or the sent fax history. You cannot manually enter the destination.
• You can send faxes when Transmission Setting By Line is set to Sending and Receiving or
Sending Only. You cannot send faxes when you select a line that is set to receive faxes only.
4. Select the Fax Settings tab, and then make settings such as the resolution and the sending method
as necessary.
5. Select the Send icon.
Your product scans your original and prompts you to place additional pages, if necessary.
After scanning your originals, your product dials the number and sends the fax.
Parent topic: Sending Faxes from the Product Control Panel
IP Fax Destination Examples
Enter the destination in a format that matches your method for sending IP faxes.