277
Setting Description
IP Address Displays the IP address. If you are manually entering the IP
address, enter it in the format xxx.xxx.xxx.xxx (where xxx is a
number between 0 and 255). Make sure the address is
unique and does not conflict with any other device on your
network.
Subnet Mask Displays the subnet mask. If you are manually entering the
subnet mask, enter it in the format xxx.xxx.xxx.xxx (where
xxx is a number between 0 and 255).
Default Gateway Displays the default gateway address. If you are manually
setting the default gateway, enter it in the format
xxx.xxx.xxx.xxx (where xxx is a number between 0 and 255).
DNS Server Setting Selects the DNS server setting. If the Obtain IP Address
setting is set to Manual, this setting is also set to Manual.
Primary DNS Server Enter the address of the primary DNS server in the format
xxx.xxx.xxx.xxx (where xxx is a number between 0 and 255).
Secondary DNS Server Enter the address of the secondary DNS server in the format
xxx.xxx.xxx.xxx (where xxx is a number between 0 and 255).
DNS Host Name Setting Sets the DNS Host Name selection method.
DNS Host Name Displays the current DNS Host Name.
DNS Domain Name Setting Sets the DNS Domain Name selection method
DNS Domain Name Specifies the DNS domain name. The name must conform to
the following format:
• Enter between 2 and 249 characters using only the
characters "A-Z", "a-z", "0-9", hyphen "-", and a period "."
• The first character cannot be a "0-9", hyphen "-", or a
period "."
• The last character cannot be a hyphen "-" or a period "."
• Each label in the domain name must be between 1 and 63
characters and separated by a period.
• The total number of characters in the host and domain
name must not exceed 251.
To Next Page
Loading...
