Epson EM-C800 - Page 293

293
Bonjour Settings
Setting Options/Description
Use Bonjour Search for or use devices through Bonjour (you cannot use
AirPrint if disabled)
Bonjour Name Displays the Bonjour name
Bonjour Service Name Displays the Bonjour service name
Location Displays the Bonjour location name
Top Priority Protocol Selects the protocol that is the top priority for Bonjour printing
iBeacon Settings
Setting Options/Description
Enable iBeacon Transmission Enable the iBeacon transmission function
SLP Settings
Setting Options/Description
Enable SLP Enable the SLP function to use the Push Scan function and
network searching in EpsonNet Config
WSD Settings
Setting Options/Description
Enable WSD Enable adding devices using WSD, and printing and scanning
from the WSD port
Note: If you do not want this product to search for devices,
disable this setting and disable the Enable IPP setting.
Printing Timeout (sec) Enter the communication timeout value for WSD printing
between 3 and 3,600 seconds
Scanning Timeout (sec) Enter the communication timeout value for WSD scanning
between 3 and 3,600 seconds
Device Name Displays the WSD device name