Epson ES-C320W - Checking the Scanners IP Address

Related Information
& “Checking the Network Connection Status” on page 165
Making AP Mode Settings
is
method allows you to connect the scanner directly to devices without an access point.
e
scanner acts as an
access point.
c
Important:
When you connect from a computer or smart device to the scanner using an AP mode connection, the scanner is
connected to the same Wi-Fi network (SSID) as the computer or smart device and communication is established
between them. Since the computer or smart device is automatically connected to other connectable Wi-Fi networks
if the scanner is turned
o,
it is not connected to the previous Wi-Fi network again if the scanner is turned on.
Connect to the scanner’s SSID in AP mode from the computer or smart device again. If you do not want to connect
every time you turn the scanner on or o, we recommend using a Wi-Fi network by connecting the scanner to an
access point.
1. Press the button on the scanner’s control panel.
e
light is lit white when AP mode connection is enabled.
2. Connect from a computer or smart device using the scanner's SSID and password.
Note:
❏ You can check the SSID and password on the label stuck to the scanner.
❏ See the documentation provided with your computer or smart device for the operating instructions.
Related Information
& “Checking the Network Connection Status” on page 165
Checking the Scanner's IP Address
You can check the scanner's IP address in the Epson Scan 2 Utility.
Note:
You need to connect the computer to the same wireless router as the scanner before checking the IP address.
1. Start Epson Scan 2 Utility.
❏ Windows 11
Click the start button, and then select All apps > EPSON > Epson Scan 2 Utility.
❏ Windows 10
Click the start button, and then select EPSON > Epson Scan 2 Utility.
❏ Windows 8.1/Windows 8
Enter the application name in the search charm, and then select the displayed icon.
❏ Windows 7
Click the start button, and then select All Programs (or Programs) > EPSON > Epson Scan 2 > Epson
Scan 2 Utility.
Required Settings for Scanning > Checking the Scanner's IP Address
101