Epson ES-C320W - Connecting to the Network Using a Static IP Address; Setting up the Ieee802.11 K;V or Ieee802.11 R Features

DNS Server and Proxy Server
e DNS server has a host name, domain name of the email address, etc. in association with the IP address
information.
Communication is impossible if the other party is described by host name, domain name, etc. when the computer
or the scanner performs IP communication.
Queries the DNS server for that information and gets the IP address of the other party. is process is called name
resolution.
erefore, the devices such as computers and scanners can communicate using the IP address.
Name resolution is necessary for the scanner to communicate using the email function or Internet connection
function.
When you use those functions, make the DNS server settings.
When you assign the scanner's IP address by using the DHCP function of the DHCP server or router, it is
automatically set.
e proxy server is placed at the gateway between the network and the Internet, and it communicates to the
computer, scanner, and Internet (opposite server) on behalf of each of them. e opposite server communicates
only to the proxy server. erefore, scanner information such as the IP address and port number cannot be read
and increased security is expected.
When you connect to the Internet via a proxy server, congure the proxy server on the scanner.
Connecting to the Network Using a Static IP Address
Selecting a static IP address using the soware installer.
1.
Start the soware installer, and then follow the on-screen instructions.
Note:
To start the installer, access the following website, and then enter the product name. Go to Setup, and then start setting
up.
https://epson.sn
2. On the Select Your Connection Method screen, select Advanced conguration, enter the static IP address,
and then follow the on-screen instructions.
Setting up the IEEE802.11k/v or IEEE802.11r Features
1. Access Web Cong, and then select the Network tab > Basic.
2.
Set IEEE802.11k/v or IEEE802.11r to enabled or disabled.
3. Click Next.
e setting conrmation screen is displayed.
4. Click OK.
Related Information
& “How to Run Web Cong in a Web Browser” on page 30
Administrator Information > Connecting the Scanner to the Network > Setting up the IEEE802.11k/v or IEEE …
171