Epson ES-C320W - Making Wi-Fi Settings from the Control Panel; Checking the Network Connection Status; Checking the Network Status Using Network Light; Checking the Network of the Computer (Windows Only)

Selecting Change the Connection Methods
Follow the instructions in each window. On the Select Install Option screen, select Set up Scanner connection
again (for new network router or changing USB to network, etc.) , and then click Next.
Select Connect via wireless network (Wi-Fi), and then click Next.
Follow the on-screen instructions to nish setup.
Making Wi-Fi Settings from the Control Panel
You can make network settings from the scanner's control panel in several ways. Choose the connection method
that matches the environment and conditions that you are using.
If the wireless router supports WPS, you can make settings by using push button setup.
Aer connecting the scanner to the network, connect to the scanner from the device that you want to use
(computer, smart device, tablet, and so on.)
Related Information
& “Connecting the Scanner to the Network” on page 169
Checking the Network Connection Status
You can check the network connection status in the following way.
Checking the Network Status Using Network Light
You can check the network connection status using the network light on the scanner’s control panel.
Related Information
& “Lights” on page 26
& “Error Indicators” on page 27
Checking the Network of the Computer (Windows only)
By using the command prompt, check the connection status of the computer and the connection path to the
scanner. is will lead you to solve the problems.
Adding or Replacing the Computer or Devices > Checking the Network Connection Status > Chec …
165