Epson ES-C320W - Encrypted Communication Using Ipsec;Ip; Filtering

2. Select a value for each item.
❏ Encryption Strength
Select the level of encryption strength.
❏ Redirect HTTP to HTTPS
Redirect to HTTPS when HTTP is accessed.
3. Click Next.
A
conrmation
message is displayed.
4. Click OK.
e scanner is updated.
Related Information
& “How to Run Web
Cong
in a Web Browser” on page 30
Conguring a Server Certicate for the Scanner
1. Access Web Cong and select the Network Security tab > SSL/TLS > Certicate.
2. Specify a certicate to use on Server Certicate.
❏ Self-signed
Certicate
A self-signed
certicate
has been generated by the scanner. If you do not obtain a CA-signed
certicate,
select this.
❏ CA-signed Certicate
If you obtain and import a CA-signed certicate in advance, you can specify this.
3. Click Next.
A conrmation message is displayed.
4. Click OK.
e scanner is updated.
Related Information
& “How to Run Web Cong in a Web Browser” on page 30
Encrypted Communication Using IPsec/IP Filtering
About IPsec/IP Filtering
You can lter trac based on IP addresses, services, and port by using IPsec/IP Filtering function. By combining of
the ltering, you can congure the scanner to accept or block specied clients and specied data. Additionally, you
can improve security level by using an IPsec.
Administrator Information > Advanced Security Settings > Encrypted Communication Using IPsec/IP Filtering
187