Epson ES-C320W - SSL;TLS Communication with the Scanner

Importing a CA
Certicate
Import the CA Certicate to the scanner.
1. Access Web Cong and then select the Network Security tab > CA Certicate.
2. Click Import.
3. Specify the CA Certicate you want to import.
4.
Click OK.
When importing is complete, you are returned to the CA Certicate screen, and the imported CA Certicate is
displayed.
Related Information
& “How to Run Web
Cong
in a Web Browser” on page 30
Deleting a CA Certicate
You can delete the imported CA Certicate.
1. Access Web Cong and then select the Network Security tab > CA Certicate.
2. Click Delete next to the CA Certicate that you want to delete.
3. Conrm that you want to delete the certicate in the message displayed.
4.
Click Reboot Network, and then check that the deleted CA Certicate is not listed on the updated screen.
Related Information
& “How to Run Web Cong in a Web Browser” on page 30
SSL/TLS Communication with the Scanner
When the server certicate is set using SSL/TLS (Secure Sockets Layer/Transport Layer Security) communication
to the scanner, you can encrypt the communication path between computers. Do this if you want to prevent
remote and unauthorized access.
Conguring Basic SSL/TLS Settings
If the scanner supports the HTTPS server feature, you can use an SSL/TLS communication to encrypt
communications. You can congure and manage the scanner using Web Cong while ensuring security.
Congure
encryption strength and redirect feature.
1. Access Web
Cong
and select the Network Security tab > SSL/TLS > Basic.
Administrator Information > Advanced Security Settings > SSL/TLS Communication with the Scanner
186